DMP Vibratory Pan Feeders are used for controlling the flow of material from feed hoppers to the vibrating screen, using twin unbalanced video motors.

Construction:

These video feeders enable the heavy-duty equipment by removing the problem of vibration caused by the welded construction. Offering uninterrupted operation each feeder utilizes the forces set up by two synchronized, counter-rotating, heavy-duty, unbalanced Vibratory Motors, which are firmly fixed to the Feeder trough, in a specific angle to the feeding level. Feeders with unbalanced drives, vibrate freely on a support spring which is insulated against vibration transmission to the base frame. This result in a straight line, push-pull, -linear, oscillating motion. The fact that the motors are synchronized and in balance with one another, eliminate the isolation problems normally associated with simple brute force single eccentric drives systems.

Adjusting the Feed Rates:

The resultant force output, amplitude final product conveying speed is readily adjustable on all Feeders. Percentage settings are marked on the shaft of each motor. Loosening one bolt on the outer eccentric weight enables the eccentricity to be adjusted to the desired percentage of maximum force available.